Use a Shop Vac to unclog your toilet

Who would think you could use a shop vac to unclog your toilet? It may not work every time, but it’s worth a try, so why not give it a try?

It doesn’t matter if the toilet bowl is filled to the brim with water or if the water is slowly running over the toilet bowl and you know something is blocking the flow of water. In other words, you have a clogged toilet and it doesn’t really matter if the water overflows, hits the bathroom floor, or doesn’t flush properly. You know you have a clogged toilet.

The first thing you will need to do is remove the air filter from your shop vacuum. I should probably remind you that you can only use commercial vacuum cleaners that can suck up water. Obviously, you can’t unclog the toilet with a regular vacuum cleaner or one that can’t be used to clean up the water.

After removing the air filter from your shop vacuum, you can stick the end of the host in the toilet and start sucking up all the water. Hopefully this will remove whatever is blocking the toilet now and you will be done with your digging.

If the vacuum suction has not dislocated, the object in your toilet and all the water is out of the toilet tank, please try to refill the toilet tank and suck all the water a second time. You can repeat this process, about five times, and if it doesn’t work, you will most likely need to remove the toilet or use a plumber’s snake to remove the object.

It doesn’t hurt to try to use the wet vacuum at least a couple of times, sometimes the object just needs a little push and can be removed when it falls back into the toilet bowl or repositions itself, to be flushed down the toilet . toilet.